User Guide
172
www.nec-computers.com
Notes:
■ Check that the top end of the PCI board bracket is inserted
in the designated slot of the riser card.
■ Some PCI boards have a terminal section that extends over
the mating connector.
10. Secure the board with the screw removed earlier.
Figure 125: Securing the PCI Card with a Screw
11. Insert the riser card into the slot on the motherboard.
Align the riser card terminal section with the slot on the motherboard, and
firmly push the riser card until it is fully seated.
Figure 126: Installing the Riser card Assembly
Low-profile type Full-height type
To Next Page
Loading...