User Guide
305
www.nec-computers.com
19. If you selected [Install the Service Pack] at the [Specify Medium Partition]
step, follow the procedure below.
a. Follow the message to take Windows Server 2003 CD-ROM out of the
optical disc drive.
b. Follow the message to insert Windows Server 2003 Service Pack 2 into
the optical disc drive.
Caution
If you are installing the Windows CD-ROM that contains Service
Pack 2 to your system, you do not have to apply the Service
pack 2 again.
Windows Server 2003 and the specified application will be installed
automatically. Install and configure the device drivers.
20. If you install Microsoft Windows Server 2003 R2, insert the Microsoft
Windows Server 2003 R2 Standard Edition DISC 2 or the Microsoft Windows
Server 2003 R2 Enterprise Edition DISC 2 into the optical disc drive drive
after the OS installation.
Follow the on-screen messages to complete the installation.
When the installation is finished, remove the optical disc from the optical disc drive,
and restart the system.
To Next Page
Loading...