User Guide
48
www.nec-computers.com
Figure 23: System Connections
1
Serial Port 2 Connect a device with a serial interface (e.g. Management PC)
Note: A leased line cannot be connected directly to this connector.
2
Front USB Ports (x2) Connect any USB device.
USB keyboard and mouse are not supported
3
LAN Connectors 1 &2
4
Serial Port 1 Connect a device with a serial interface
Note: a Management PC cannot be connected on this port, but only to
serial port B (BIOS Setup changes are required). A leased line cannot be
connected directly to this connector.
5
Management port Connect your network or hub.
6
PS/2 Keyboard Port Connect a PS/2 keyboard, using the provided “Y” cable.
7
PS/2 Mouse Port Connect a PS/2 mouse, using the provided “Y” cable.
8
VGA Port Connect the monitor.
9
Rear USB Ports (x2) Connect any USB device.
Note: USB keyboard and mouse are not supported
10
Power Inlet When all peripherals are connected, finally connect the provided power
cable to a 15 A rated wall outlet or to a BackUPS
0
1
2
3
4
5
A
1
2
3
4
5
6
7
8
9
10
To Next Page
Loading...