NEC Express5800 120Rj-2 - Main Menu

User Guide
66
www.nec-computers.com
Main Menu
Primary and Secondary Master & Slave IDE submenus
Table 3: Main Menu
Feature Choices or
Display Only
Description Your Setting
System Time HH:MM:SS Set the System Time.
System Date MM/DD/YYYY Set the System Date.
Hard Disk Pre-Delay Disabled
3, 6, 9, 12, 15, 21,
30 Seconds
Allows to add a delay before the first
access of a hard disk drive by the
BIOS.
Primary IDE Master Selects sub-menu
Primary IDE Slave Selects sub-menu
Secondary IDE Master Selects sub-menu
Secondary IDE Slave Selects sub-menu
Processor Settings Selects sub-menu
Language English (US)
Français
Deutsch
Español
Italiano
Select the display language for the
BIOS.
Table 4: Primary And Secondary Master And Slave IDE Submenus
Feature Choices or
Display Only
Description Your Setting
Type Auto
None
User
CD-ROM
Select Auto if a device is attached to the
IDE or serial ATA channel. It is strongly
recommended to keep the factory setting
Auto
Multi-Sector
Transfer
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Enables or disables multiple sector
transfers support. This field is
informational only, for Type Auto.
LBA Mode Control Enabled
Disabled
LBA stands for "logical block addressing".
Instead of referring to locations by passing
to the disk a cylinder, head and sector
number (CHS addressing), the sectors
are serialized so that each just has an
integer number; 0, 1, 2, etc. up to the total
number of sectors on the disk. Disabled
will disable the LBA mode, Auto will
enable it if the IDE device supports it. This
field is informational only, for Type Auto.
32-Bit I/O Disabled
Enabled
Enables/disables the 32-Bit IDE data
transfer mode.