NEC Express5800 120Rj-2 - Page 67

User Guide
67
www.nec-computers.com
Processor Settings Submenu
Transfer Mode Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3/DMA1
FPIO 4/DMA2
Select the method for moving data to/from
the drive. This field is informational only,
for Type Auto. This field is updated to
display only the modes supported by the
attached device.
Ultra DMA Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Selects the DMA mode used for moving
data to/from the drive. This field is
informative only for Type Auto.
Table 5: Processor Settings Submenu
Feature Choices or
Display Only
Description Your Setting
Processor Retest Yes
No
If Yes is selected, the BIOS will
clear historical processor status
and retest the processor on
next boot.
Processor Speed Display only Displays the processor speed
detected by the BIOS
Processor 1 CPUID Display only Displays the processor CPU ID
detected by the BIOS, if
present
Disabled indicates that the CPU
is defective.
Processor 1 L2
Cache
Display only Displays the processor level 2
cache detected by the BIOS
Processor 2 CPUID Display only Displays the processor CPU ID
detected by the BIOS, if
present
Disabled indicates that the CPU
is defective.
Processor 2 L2
Cache
Display only Displays the processor level 2
cache detected by the BIOS
Execute Disabled
Bit
Disabled
Enabled
Displays the CPU which
supports Execute Disabled Bit
Virtualization
Technology
Enabled
Disabled
Enables or disables the Intel(R)
Virtualization Technology.
C1 Enhanced Mode Enabled
Disabled
Enables or disables the C1
Enhanced Mode
Intel(R)
Speedstep(R)
technology
Enabled
Disabled
Enables or disables the Intel(R)
SpeedStep Technology.
Table 4: Primary And Secondary Master And Slave IDE Submenus (Continued)
Feature Choices or
Display Only
Description Your Setting