English-13
English
AUDIO (E233WM only)
Controls the volume of the speakers or headphones.
To mute the speaker output, select Audio icon and touch “INPUT/RESET” key.
BRIGHTNESS
Adjusts the overall image and background screen brightness.
To enter the ECO MODE, touch the “INPUT/RESET” key.
ECO MODE OFF: Sets brightness variable from 0% to 100%.
ECO MODE1: Sets brightness 80%.
This setting can adjust brightness within the range that power has reduced 10% from maximum brightness setting.
ECO MODE2: Sets brightness 40%.
This setting can adjust brightness within the range that power has reduced 30% from maximum brightness setting.
CONTRAST
Adjusts the image brightness in relation to the background.
To enter the DV MODE setting, select CONTRAST icon and set DV MODE to OFF, then touch the “INPUT/RESET”
key.
DV MODE: Setting that adjusts the brightness by detecting the screen’s black areas and optimizes it.
NOTE: “OFF” is used for TCO Certifi cate compliance.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
AUTO ADJUST (Analog input only)
Automatically adjusts the Image Position, the H. Size and Fine settings.
LEFT/RIGHT (Analog input only)
Controls Horizontal Image Position within the display area of the LCD.
DOWN/UP (Analog input only)
Controls Vertical Image Position within the display area of the LCD.
H. SIZE (Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting.
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
COLOR CONTROL SYSTEMS
Five color presets (9300/7500/sRGB/USER/NATIVE) select the desired color setting.
COLOR RED
Increases or decreases Red. The change will appear on screen.
COLOR GREEN
Increases or decreases Green. The change will appear on screen.
COLOR BLUE
Increases or decreases Blue. The change will appear on screen.
TOOL
Selecting TOOL allows you to get into the sub menu. See page 14.
OSD TOOL
Selecting OSD TOOL allows you to get into the sub menu. See page 14.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings except MUTE,
CARBON SAVINGS, CARBON USAGE, and SIGNAL INFORMATION. Individual settings can be reset by highlighting
the control to be reset and touching the INPUT/RESET key.
To Next Page
Loading...
Need help?
General