NEC MultiSync E750 - Page 20

Monitor
Specifications
MultiSync E950
Monitor
Notes
Picture Tube Diagonal:
Viewable ImageSize:
Radius:
48.3 cm (19 inch)
45.7 cm (18.0 inch)
1300 mm
100° deflection, 0.25 mm mask pitch,short-depth
CROMACLEAR CRT,medium-short persistence
phosphor,multi-layered,anti-static screen coating,
semi-dark tint screen,Invar Shadow Mask and
OptiClear screen surface.
Input Signal Video:
Sync:
ANALOG 0.7 Vp-p/75 Ω
Separate sync. TTL Level
Horizontalsync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends onthe display card
Synchronization
Range
Horizontal:
Vertical:
31 kHz to 96 kHz
55 Hz to 160 Hz
Automatically
Automatically
Resolutions Supported
Resolutionbased on horizontal andvertical
frequencies only
640 x 480@ 60 to 160 Hz
800 x 600@ 55 to 152 Hz
832 x 624@ 55 to 144 Hz
1024 x 768 @ 55 to 120 Hz
1152 x 870 @ 55 to 105 Hz
1280 x 1024 @ 55to89Hz...................
1600 x 1200 @ 55 to 77 Hz
Some systems may not support all modes listed
NEC cites recommended resolution at 85Hz for
optimal display performance.
Active DisplayArea
(Factory setting)
Horizontal:
Vertical:
356 mm
267 mm
Dependent upon signal timing used, and does not
include borderarea.
Active DisplayArea
(Full scan)
366 mm
274 mm
Dependent upon signal timing used, and does not
include borderarea.
Power Supply AC 100-120 V / 220-240 V, 50/60Hz
Current Rating 1.6 A @ 100-120V / 0.8A @ 220-240 V
Dimensions 440 (W)x 452 (H)x 404 (D) mm
Weight 22.5 kg
Enviromental Considerations
Operating Temperature:
Humidity:
Altitude:
Storrage Temperature:
Humidity:
Altitude:
+10° C to +35° C
30% to 80%
0 to 3000m
-20° C to +60° C
10% to 90%
0 to 13700m
NOTE: Technical specifications are subject to change without notice.
E - 12