EasyManua.ls Logo

NEC N8181-153 - Safety Precautions; General Safety Warnings; Handling, Transfer, and Disposal; Proper Operations

NEC N8181-153
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Observe the following notes to use the product safely.
WARNING
If smoke, odor, or noise is present, immediately turn off the server and disconnect the power plug
from the outlet, then contact the store where you purchased the product or your maintenance
service company. Using the server in such conditions may cause a fire.
CAUTION
Be sure to install the product on a server specified in this manual. Installing the product on any other
server than specified may cause malfunction of the server or a fire due to insufficient cooling effect in
the target server.
Do not install or store the server in the following places or any place that does not satisfy the
environmental conditions specified in the user’s guide of the server. Failure to follow this instruction
may cause a fire or malfunction of the server.
●Places near chemicals or chemical substances
●Places exposed to direct sunlight
●Places where the air includes much humidity
●Places of uneven or slanting floor
●Places with drastic changes in temperature
●Place where vibration or impact may be generated
●Places with corrosive gas (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia,
ozone, etc.) in presence
●Places where the air includes components accelerating corrosion (ex. sulfur, sodium chloride) or
conductive metals.
Be sure to observe the following precautions for the proper functioning of the product. Ignoring the precautions
may cause server malfunction or failure.
●Do not pile up the products.
●Pay attention not to hit the product against a solid object during installation, removal, or storage.
●Do not drop the product even when it is packaged. Doing so may cause damage to the product.
< Notations used in this User's Guide >
The following symbol is used in this document. It has the following meaning.
Indicates items that must be confirmed when handling hardware or operating software.
Make sure to provide all accessories including this manual along with the product to a third party.
Dispose of this product according to all national laws and regulations.
Safety Precautions
Handling precautions (for proper operations)
Transfer to Third Party
Disposal
Note

Related product manuals