Section
1 Start Here 7
CONNECTING THE INTERFACE CABLE
A parallel interface cable connects the
Printer
to your Computer. This cable must be
purchased separately (a 6-foot cable is recommended). To make
Sure
you get the right
cable, contact your
Printer
dealer
or Computer
dealer.
@
Switch
off the
Printer
and the Computer.
WARNING:
Before connecting the interface cable, turn off both your
Printer
and
Computer.
@
Locate the parallel interface connector at the left of the
Printer.
@
Connect one end of the cable to the
Printer.
@ Secure the connector with the
clips.
\
@
Connect the other end of the cable to the interface port at the rear of your
Computer.
Clip
Interface Cable
To Next Page
Loading...