20 Section 3 Control Panel
@
Press MODE.
GUUUF’
P.
L
1 J 3
.?
i
5
@
Press FEED/LOAD
repeatedly until “GROUP B 1 2 3
[4]
5”
is printed, then
press
MODE.
0
The
printer prints the entries in the CR function.
NOTE: The skipped settings of the menu numbers 1 to 3 are left with no change.
@
Press FEED/LOAD
to surround “CR + LF’ with the brackets ([
I),
then press
MODE
to select it.
@ At the “MSW WRITE OK? Yes/No” question, press
MODE
to reset the CR
function setting to new setting. To modify the new setting, press
FEEDROAD
and return to step
0.
B) At the “Mode Exit? Yes/No” question, press
MODE,
then the printer prints the
main menu of the normal setting mode. To modify the other settings in Group B,
press
FEED/LOAD
and perform steps
@
to
@
in the same manner.
@
Turn off the printer to quit the menu mode.
NOTE: Do not turn off the printer in the memory switch menu mode until the
main menu
of the normal setting mode is printed.
To Next Page
Loading...