28 Section 4
Paw
Loadina
Tearing Off Coniinuous Papers
This function can be used only when the tractor is installed as a push tractor.
Use the edge of the top cover to tear continuous papers. It is recommended that
forms be tom at the perforation.
@ Make sure the paper selection lever is set to the front position, and the paper
is loaded on the platen.
Q
Press FEED/LOAD for one second or more. Printer will perform the form feed
and align the perforation with the top cover.
Q
Tear the paper at the perforation by pulling it toward you.
@ Press FEED/LOAD to return the paper to the first print position. The paper
also returns automatically to the first print position when print data is
received from the computer.
h
.
Aufomatic
Tear
Off
Feature
With the tractor installed as a push tractor, you can tear off the continuous papers
without pressing FEED/LOAD. The printer will advance the paper and align the
perforation with the edge of top cover two seconds after printing of the last line.
Loading for Rear Feed with Pull Tractor
Use the following steps to load the printer with continuous papers for rear feed
8
Set the sheet guide sheet guide upright.
@
Set the paper selection lever to the rear position.
@
Open the top cover and set the paper thickness setting lever depending on the
weight and thickness of
the
paper.
To Next Page
Loading...