NEC SL100 - Page 139

Item
No.
Item Input Data Default
Related
Program
Note
06 Hold Key Operating Mode
Use this option to set the func-
tion of the Multiline Hold key.
The Hold key can activate nor-
mal Hold or Exclusive Hold.
0 = Normal (Common)
1 = Exclusive Hold
2 = Park Hold
0
07 Automatic Hold for CO Lines
When talking on a CO call and
another CO line key is pressed,
the original trunk is placed on
Hold (0) or Disconnected (1).
0 = Hold
1 = Disconnect (Cut)
1
08 Automatic Handsfree
Use this option to set whether
pressing a key access a One-
Touch Key or if it preselects the
key.
0 = Preselect
1 = One-Touch (Automatic Handsfree)
1
10 Ringing Line Preference for
Trunk Calls
Use this option to select be-
tween Idle and Ringing Line
Preference for trunk calls.
0=Idle(Off)
1 = Ringing (On)
1
11 Callback Automatic Answer
Use this option to enable or
disable automatic answer of
calls recalling to a station. For
example, if a Transfer Recall or
Hold Recall is ringing back to a
station, the following happens:
If Program 15-02-11 is enabled,
the station will automatically
answer the recall when it goes
off-hook. If Program 15-02-11 is
disabled, a station does not
automatically answer the recall
when it goes off-hook. The user
must first press the line appear-
ance of the recalling call or
press the answer key.
0=Off
1=On
1
12 Off-Hook Ringing
Use this option to set the tele-
phone Off-hook signaling. Off-
hook signaling occurs when a
telephone user receives a sec-
ond call while busy on a hand-
set call. To enable/disable Off-
hook signaling for an extension
Class of Service, use Program
20-13-06.
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker and Handset Beep
0
13 Redial List Mode
Select whether the Redial List
feature should store internal
and external numbers (0), or
only external numbers (1).
0 = ICM/Trunk (Extension/Trunk
Mode)
1 = Trunk Mode
0
15 Storage of Caller-ID for an-
swered call
0=Disable(Off)
1 = Enable (On)
1
16 Handsfree Operation
Enable or disable an extension
ability to use the speakerphone
on outside calls. When dis-
abled, users can hear the con-
versation, but cannot respond
handsfree.
0=Disable(Off)
1 = Enable (On)
1
18 Power-Saving Mode 0 = Normal mode
1 = Power-Saving Mode (Eco-Mode)
1 (V1.5 Added)
ISSUE 1.1 SL1000
Program
15
Programming Manual 2-117