Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each out-
side line.
Input Data
Program Number XX-XX
Item No. Item Input Data
01 Source Number
Enter the port number from where the data is to be copied.
• For Trunk Base : Trunk Port Number
001 ~ 126
• For Trunk Group Base : Trunk
Group Number 01 ~ 25
• For Extension Number : 001 ~ 128
Including Virtual Extension : 01 ~ 50
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : (DSS Console Number
01~12
02 Destination Number (From)
Enter the first port number to where the information is to be cop-
ied
03 Destination Number (To)
Enter the last port number to where the information is to be cop-
ied. If the information is to be copied only to one port, enter the
information entered in the Destination Number (From) entry.
Refer to Program 92-01 Copy Program on page 2-564 for program that can be copied.
Conditions
None
Feature Cross Reference
None
ISSUE 1.1SL1000
Program
92
Program 92 : Copy Program2-568
To Next Page
Loading...
