NEC SL100 - Fill Command

Program 92 : Copy Program
92-06 : Fill Command
Level
IN
Description
Use Program 92-06 : Fill Command to allocate the data of each extension number of each extension
group or each table.
Input Data
Program Number XX - XX
Item No. Item Input Data
01 Source Number Each extension port = 001 ~ 128 (Program 11-02)
Each virtual extension port = 01 ~ 50 (Program 11-04)
Each extension group = 1~32 (Program 11-07)
Destination Number (From)
Destination Number (To)
The following table lists Programs that use the Fill Command function.
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-07 Extension (Department) Group Pilot Number
Conditions
None
Feature Cross Reference
None
ISSUE 1.1SL1000
Program
92
Program 92 : Copy Program2-572