NEC SL1000 - Wall-Mounting the DSS Console; Figure 2-120 High Position Setting; Figure 2-121 Cabling for Wall-Mount

3. Adjust the leg to desired height.
< High position >
Leg
Figure 2-120 High Position Setting
4. Lead the Line cord through the applicable grooves.
(Refer to Figure 2-118 Cabling of DSS on page 2-80)
5.3.2 Wall-Mounting the DSS Console
1. Lift the leg and lead the cable through the applicable grooves. Refer to Figure 2-121 Cabling for
Wall-Mount on page 2-81. Lower leg to stowed position.
< Bottom view>
Leg
Figure 2-121 Cabling for Wall-Mount
ISSUE 3.0 SL1000
Hardware Manual 2-81