NEC SL1000 - Section 3 SYSTEM CAPACITY; System Capacity; Table 1-2 System Capacity

SECTION 3 SYSTEM CAPACITY
3.1 System Capacity
Table 1-2 System Capacity
Items 1 KSU
(1632)
2 KSU
(3264)
3 KSU
(4896)
4 KSU
(64128)
Note
Expansion Slot 3 6 9 12 *4th slot of each KSU can not be used
for 4w Key Set.
*4th KSU can not be used for COI,
2BRIDB and 1PRIU.
System Maximum Port 66 132 198 230 1KSU: 408M+PRI+408Ex2
2KSU: 408Mx2+PRIx2+408Ex4
3KSU: 408Mx3+PRIx3+408Ex6
4KSU: 408Mx4+PRIx3+408Ex6
+008Ex3-400Mx1(4th KSU)
Trunk Port Max. 42 84 126 126 1KSU: 408M+PRIx1+408Ex2
2KSU: 408Mx2+PRIx2+408Ex4
3/4KSU: 408Mx3+PRIx3+408Ex6
Trunk Port Analog Trunks
(COT)
16 32 48 48 1KSU: 408M+408Ex3
2KSU: (408M+408Ex3) x2
3/4KSU: (408M+408Ex3)x3
BRI 12 24 36 36 1KSU: 2BRIx3 on 008E/000E
2KSU: 2BRIx6
3/4KSU: 2BRIx9
PRI (E1) 30 60 90 90 Max. 1 PRI/KSU
Max. 3 PRI/sys
IP Trunk (SIP/H.
323)
16 When MEMDB is installed
External Paging
(Audio Out)
1 2 3 3 1 audio In/Out and 2 audio In circuits on
408M (COI port 2: Paging, 3: MOH, 4:
BGM) Need the Program Setting. Alterna-
tive use with COT
External MOH
(Audio In)
1
External BGM
(Audio In)
1
Station Port Max. 32 64 96 128 1KSU: 408M+408Ex3
2KSU: 408Mx2+408Ex6
3KSU: 408Mx3+408Ex9
4KSU: 408Mx4+408Ex12
SL1000 ISSUE 3.0
1-10 Introduction