NEC SL1000 - Ksus Inter-Connection; Grounding and AC Cabling; Figure 2-17 Connection of Ksus

1.4.5 KSUs Inter-connection
1. Connect the Main KSU (1632M-A) and Expansion KSU (1632ME-A) using the cables attached to
the Expansion KSU.
Exp. KSU No.1 (1632ME-A)
Exp. KSU No.2 (1632ME-A)
Main KSU (1632M-A)
< Bottom View >
< Bottom View >
Exp. KSU No.3 (1632ME-A)
< Bottom View >
< Front View >
< Bottom View >
EXIFE-C1 PCB
CPU card
EXIFE-C1 PCB
EXIFE-C1 PCB
EXIFB-C1 PCB
EXP 3
EXP 2
EXP 1
EXPLANEXPEXP
Figure 2-17 Connection of KSUs
Use attached cables for the above inter-connection.
Because of cable length, KSU positioning is limited.
1.5 Grounding and AC Cabling
The ETH (Earth Ground Lug) is located near the power supply on each KSU. The Sub-Cover must be
opened in order to access to it.
SL1000
ISSUE 3.0
2-12 Installation