NEC SL1000 - Cabling and Setting IP4 WW-2 BRIDB-C1; Cabling IP4 WW-000 E-A1; Figure 2-76 Connectors of 008 E-A1

Topaz Terminal does not work properly when it connected.
65
䕰
䕦
J4
Extension Port
ST16
ST24
ST32
ST16, ST24
Wire Position
for each Port
Extension Port Position
ST25
ST17
ST9
ST32
ST24
ST16
T
LH
R
T
LH
LH
R
TR
ST9 1st EXP. PCB
ST17 2nd EXP. PCB
ST25 3rd EXP. PCB
Modular Cable
(4-wire, Straight)
Multiline
Telephone
DSS Console SLT
Modular Cable
(2-wire, Straight)
Figure 2-76 Connectors of 008E-A1
Only Analog Telephones can be connected when this PCB is installed as the 3rd PCB in each Main or
Expansion KSU. Multiline Telephones and DSS Console must not be connected.
3.4.3 Cabling IP4WW-000E-A1
This IP4WW-000E-A1 PCB does not have any connector for cabling.
3.4.4 Cabling and Setting IP4WW-2BRIDB-C1
This IP4WW-2BRIDB-C1 PCB provides two RJ-61 BRI connections.
SL1000
ISSUE 3.0
2-52 Installation