Related Features
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Answering
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Long Conversation Cutoff
Tandem Trunking (Unsupervised Conference)
Transfer
Voice Response System (VRS)
Guide to Feature Programming
Program Num-
ber
Program Name Default
10-09-01 DTMF and Dial Tone Circuit Setup Resource 01 - 132 = 0 (Common)
(SL1000)
Resource 01 - 96 = 0 (Common)
(SL1100)
11-01-01 System Numbering Refer to Programming Manual.
11-09-02 Trunk Access Code - 2nd Trunk Route Access Code not assigned
14-01-02 Basic Trunk Data Setup - Transmit Level 32 (0dB)
14-01-03 Basic Trunk Data Setup - Receive Level 32 (0dB)
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Transfer 1
20-01-05 System Options - DTMF Receive Active Time 10 (seconds)
20-06-01 Class of Service for Extensions All extension port = Class 1
20-09-01 Class of Service Options (Incoming Call Service) - Second
Call for DID/DISA/DIL Override
COS 01~15 = 0
20-13-23 Class of Service Options (Supplementary Service) - Display
the Reason for Transfer
COS 01~15 = 0
20-14-01 Class of Service Options for DISA - First Digit Absorption
(Delete First Digit Dialed)
COS 01~15 = 0
20-14-02 Class of Service Options for DISA - Trunk Group
Routing/ARS Access
COS 01~15 = 0
20-14-03 Class of Service Options for DISA - Trunk Group Access COS 01~15 = 0
20-14-04 Class of Service Options for DISA - Outgoing System Speed
Dialing
COS 01~15 = 0
20-14-05 Class of Service Options for DISA - Operator Calling COS 01~15 = 0
20-14-06 Class of Service Options for DISA - Internal Paging COS 01~15 = 0
20-14-07 Class of Service Options for DISA - External Paging COS 01~15 = 0
20-14-08 Class of Service Options for DISA - Direct Trunk Access COS 01~15 = 0
20-14-09 Class of Service Options for DISA - Forced Trunk Discon-
nect <Not for ISDN T-point>
COS 01~15 = 0
20-14-10 Class of Service Options for DISA - Call Forward Setting by
Remote via DISA
COS 01~15 = 0
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-213
D