NEC SL1000 - Page 225

Trunk Continue/Disconnect Codes
Program Number Program Name DefaultS
14-01-25 Basic Trunk Data Setup - Continued/Discontinued Trunk-to-
Trunk Conversation
0
22-07-01 DIL Assignment not assigned
20-28-01 Trunk to Trunk Conversation - Conversation Continue Code not assigned
20-28-02 Trunk to Trunk Conversation - Conversation Disconnect
Code
not assigned
20-28-03 Trunk to Trunk Conversation - Conversation Continue Time 0 (seconds)
24-02-07 System Options for Transfer - Trunk-to-Trunk Transfer Re-
lease Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect Trunk-to-Trunk 0 (seconds)
25-07-07 System Timers for VRS/DISA - Long Conversation Warning
Tone Time
30 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversation Discon-
nect Time
15 (seconds)
Operation
To place a DISA call into the system:
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension.
- OR -
Dial 9 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 804 + a trunk group number (1~25) for an outside call.
- OR -
Dial #0 + a trunk number (001~126 (SL1000) 001~096 (SL1100)) for an outside call.
- OR -
Dial #2 + System Speed Dialing bin number.
- OR -
Dial 0 for the operator.
- OR -
Dial 801 + an Internal Paging Zone number (0, 1~9, 00, 01~64).
- OR -
Dial 803 + an External Paging Zone number (1~8 or 0 for All Call).
- OR -
Dial 810 + a busy extension number to barge in to a call.
To forward extension calls using a DISA call into the system:
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-215
D