NEC SL1000 - Page 436

Delete and replace the + and matched country code from an incoming SIP INVITE
using E.164 numbering scheme:
PRG 84-14-16 PRG 84-14-13 Description/Comments
2: Mode 2 1: ON With a SIP INVITE for incoming calls. When a + is presented as the international
access code along with a country code that DOES NOT match the value in PRG
10-02-01, then delete the + and add the international access code value in PRG
10-02-02 only.
Or
With a SIP INVITE for incoming calls. When a + is presented as the international
access code along with a country code that DOES match the value in PRG
10-02-01, then delete the + and country code but DO NOT add the international ac-
cess code value.
< Example Output >
Incoming call from: +4902131795770
PRG 10-02-02 = 00
PRG 10-02-03 = 9
Displayed in terminal incoming caller history as:
01: 4902131795770
3-5 11:17
Store DEL
Original
01: 004902131795770
3-5 11:17
Store DEL
PRG 10-02-01 = 0
01: 902131795770
3-5 11:17
Store DEL
PRG 10-02-01 = 49
Making an outgoing call from history of incoming calls:
1. From an idle multiline terminal.
2. Press soft key List.
3. Press soft key CID.
4. Press Speaker.
SL1000/SL1100
ISSUE 2.0
1-426
IP Trunk - (SIP) Session Initiation Protocol
I