NEC SL1000 - Page 482

Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-21 Service Code Setup (for Service Access) - Meet-
Me Answer to Specified Internal Paging Group
864
11-12-22 Service Code Setup (for Service Access) - Meet-
Me Answer to External Paging
865
11-12-23 Service Code Setup (for Service Access) - Meet-
Me Answer in Same Paging Group
863
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions All extension port = Class 1
20-10-06 Class of Service Options (Answer Service) - Meet-
Me Conference and Paging
COS 01~15 = 1
31-02-01 Internal Paging Group Assignment - Internal Pag-
ing Group Number
0 for IP Station
1 for TDM Station All Stations = 0
31-02-02 Internal Paging Group Assignment - Internal All
Call Paging Receiving
0
For additional programming information on Paging, refer to Paging, External on page 1-537 and Paging,
Internal on page 1-542 features.
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial Paging code [External 803, or Combined (
*
1)] and the Paging Zone.
3. Announce the zone.
- OR -
1. At the Multiline Terminal, press the External Paging Zone key (PRG 15-07-01 or SC 851: 19 +
zone).
2. Announce the zone.
To join a Meet Me External Page:
1. At the Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 865.
3. Dial the announced External Paging Zone (1~3).
You connect to the other party.
SL1000/SL1100 ISSUE 2.0
1-472
Meet Me Paging
M