Line Preference
Guide to Feature Programming
Program Num-
ber
Program Name Default
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 126 = Priority 1 ~ 126
(SL1000)
Trunk Port 1 ~ 96 = Priority 1 ~ 96
(SL1100)
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4 = 0 (Not Speci-
fied)
All Other Routes (2 ~ 25) and Order
Numbers (1 ~ 4) = 0
(Not Specified)
14-07-01 Trunk Access Map Setup - Trunk Port Number Access Map 1 = Trunk Ports 1 ~ 126
assigned with option 7 access (incom-
ing and outgoing access and access
when trunk is on Hold). (SL1000)
Access Map 2 ~ 126 = Trunk Ports 1 ~
126 assigned with option 0 access (No
access). (SL1000)
Access Map 1 = Trunk Ports 1 ~ 96 as-
signed with option 7 access (incoming
and outgoing access and access when
trunk is on Hold). (SL1100)
Access Map 2 ~ 96 = Trunk Ports 1 ~
96 assigned with option 0 access (No
access). (SL1100)
15-01-02 Basic Extension Data Setup - Outgoing Trunk Line Prefer-
ence
0
15-02-10 Multiline Telephone Basic Data Setup - Ringing Line Pref-
erence for Trunk Calls
1
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-08-21 Class of Service Options (Outgoing Call Service) -Auto-
matic Trunk Seizing by Pressing Speaker Key
COS 01 ~ 15 = 0
21-02-01 Trunk Group Routing for Extensions 1
22-01-01 System Options for Incoming Calls - Incoming Call Priori-
ty
1
22-04-01 Incoming Extension Ring Group Assignment Extension 200 (first port)
22-05-01 Incoming Trunk Ring Group Assignment 1
Operation
To place a call on your Prime Line:
1. Lift the handset.
You hear dial tone on your Prime Line.
- OR -
SL1000/SL1100
ISSUE 2.0
1-566
Prime Line Selection
P
To Next Page
Loading...
