Redial Function
Description
Users can press the Redial key to cycle through the last 10 outside numbers dialed. Dialing # redials
the number displayed. Users can also press the Redial key and dial a System Speed Dial bin number
to access System Speed Dial.
Names stored as common speed dial or extension name can be displayed for redialed numbers.
Conditions
• Redial List requires a display telephone.
• When set PRG 15-02-60 :0, Redial feature work by pressing the Left Cursor key, then dial #/ SYS
menu is displayed on LCD. When set PRG 15-02-60 :1 or 2, pressing the Left Cursor key enter
Received call log or pressing the Right Cursor key enter Dialed Number log for Redial function.
Refer Navigation key feature section.
• Stored name for Redial Function is cleared when the system is reset.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Last Number Redial
Guide to Feature Programming
None
SL1000/SL1100
ISSUE 2.0
1-578
Redial Function
R
To Next Page
Loading...
