Program Number Program Name Default Note
20-46-10
(Watch mode)
Monitored Terminal No setting
20-46-11
(Watch mode)
Interval Timer for Emergency Call 0
20-47-01
(Watch mode)
Watch Mode time pattern 0
20-48-01
(Watch mode)
Security Sensor time pattern 0
20-55-01
(Watch mode)
Sensor Delay Timer 60 seconds (V1.5 Added)
35-02-22
(Watch mode)
Security Auto Dialing 1
82-21-01
(Watch mode)
Sensor Type 0
82-21-02
(Watch mode)
Sensor Alarm detect minimum level 24 (120ms)
82-21-03
(Watch mode)
Sensor Idle detect minimum level 24 (120ms)
90-10-01 Alarm Type Refer to Programming Manual.
90-10-02 Report Refer to Programming Manual.
90-20-11 Security Sensor Dial Record 1
Operation
Warning Message (Watch Mode)
< Program >
PRG 11-10-20: 716; Record, Erase VRS message SC716.
PRG 11-10-46: 714; Watch message setting
PRG 11-12-63: 817+1/0; Watch Mode Start/Stop.
PRG 15-07-01: Set “
32” to Function key.
PRG 20-44-01:1; Internal paging group, 1
PRG 20-44-02:1; External paging group, 1
PRG 20-44-03:1; VRS message number for watching, 1
PRG 20-44-04:5; Interval time of Watching message, 5 minutes.
PRG 20-47-01:1; Watch mode time pattern, 1
To record Watching message to VRS 001:
1. Press Speaker key + dial 716 + 7 + 001 at terminal.
2. After beep tone, record message.
3. Press Speaker key and finish recording.
Set up Watch mode
1. Press Speaker key + dial 714 at terminal.
2. Dial Internal paging group number, “01”.
3. Dial external paging group number, “1”.
4. Dial Interval time of Watching message, “05”.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-617
S
To Next Page
Loading...
