6. Hang up.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key or #0 plus the
trunk number + 724 ).
Continue/Disconnect Codes
To use the Continue code to extend a Tandem Trunk call:
1. An external call connects to an external number either by transferring with Tandem Trunking or by
DISA caller.
2. After the programmed time (PRG 24-02-07), a warning tone is heard and the user dials the
Continue code (PRG 20-28-01) to extend the conversation.
3. After the programmed time (PRG 20-28-03), the warning tone is heard again. After the
programmed time (PRG 24-02-10), the call is disconnected.
SL1000/SL1100 ISSUE 2.0
1-686
Tandem Trunking (Unsupervised Conference)
T
To Next Page
Loading...
