NEC SL1000 - Page 748

To Set the Incoming Voice/Melody ringing from Service Code
1. Press Service Code 878.
VRS INCOM
RI:1 STA:2
(SL1000)
VRS INCOM
RI:1 STA:2
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
2. Press Enter 1 (RI).
VRS INCOM CID
(SL1000)
VRS INCOM CID
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
3. Enter the Caller ID Number.
You can clear the digits entered by pressing Exit key.
VRS INCOM CID
123
(SL1000)
VRS INCOM CID
123
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
SL1000/SL1100
ISSUE 2.0
1-738
Voice/Melody Ringing by VM
V