NEC SL1000 - Page 751

9. Enter the VRS Incoming Message Number: 000 ~ 100 (13-04-07).
ABB0001 MX VRS
001
MX = X is Mode 1 ~ 3 (PRG 13-04-03) (SL1000)
ABB0005 ModeX VRS
001
ModeX = X is Mode 1 ~ 3 (PRG 13-04-03)
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
10. If you set correctly you will hear the Confirmation Beep and see the following Screen.
Set ABB
(SL1000)
Set ABB
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
11. Press Speaker and end the Setting.
To Cancel the Incoming Voice/Melody ringing from the Call History Mode (SL1000)
1. Below shows the Call ID History list.
1-19 16:08
01: 123
2. Press Down on a Navigation Key.
Store? Yes:1
01: 123
3. Press 1 (YES).
ABB:1 DND:2
RI:3
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-741
V