NEC SL1000 - Page 752

4. Press 3 (RI) (PRG13-04-01).
It will search and see if the CallerID already exist in ABB or not. If it already does exist it.
ABB0001
123
5. Press Hold. You can set Name (PRG 13-04-02).
ABB0001
-
6. Press Hold and Enter the Transfer Mode 0 ~ 3 (PRG13-04-03).
TRF0 = Not defined
TRF1 = Internal Dial
TRF2 = IRG
TRG3 = Remote Monitor
ABB0001
TRF (0-3)?0-
7. Press 0 and RI Set will be Canceled.
Set ABB
Cancel RI
8. Press Speaker.
To Cancel the Incoming Voice Melody ringing from Service Code
1. Press Service Code 878.
VRS INCOM
RI:1 STA:2
(SL1000)
VRS INCOM
RI:1 STA:2
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
SL1000/SL1100
ISSUE 2.0
1-742
Voice/Melody Ringing by VM
V