NEC SL1000 - Page 754

5. Press Hold. You can set Name (PRG 13-04-02).
ABB0001
-
(SL1000)
ABB 0005
-
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
6. Press Hold and Enter the Transfer Mode 0 ~ 3 (PRG13-04-03).
TRF0 = Not defined
TRF1 = Internal Dial
TRF2 = IRG
TRG3 = Remote Monitor
ABB0001
TRF (0-3)?0-
(SL1000)
ABB0005
TRF Mode(0-3)?0-
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
7. Press 0 and RI Set will be canceled.
Set ABB
Cancel RI
(SL1000)
Set ABB
Cancel RI
(This display indication is for IP Terminal Only.) (V2.0 or higher) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
8. Press Speaker.
SL1000/SL1100
ISSUE 2.0
1-744
Voice/Melody Ringing by VM
V