• An attempt to Voice Over a station can be denied if the station is in DND (Do Not Disturb) Mode,
Automatic Redial is activated, during Station Programming, during Incoming Ringing, during
Internal/External Paging, during a Conference Call, during a conference call on hold, the terminal is
on internal hold, or the terminal has a call on internal hold.
• When a Single Line Terminal is on a call and Voice Over is presented, the Single Line Terminal
cannot talk back to the party that originated the Voice Over.
• Voice Over to a Single Line Terminal is not recommended because cross talk is inherent in the side
tone of analog telephones.
• Voice Over to a user on Speaker phone is not recommended because the conversation may be
heard by the outside party.
• Answering a Voice Over requires a uniquely programmed Voice Over key.
Default Settings
Disabled
System Availability
Terminals
Multiline and Single Line Terminals
Required Component(s)
None
Related Features
Conference
Off-Hook Signaling
Programmable Function Keys
Guide to Feature Programming
Program
Number
Program Name Default
11-12-41 Service Code Setup (for System Access) - Voice
Over
890
11-16-08 Single Digit Service Code Setup - Voice Over 6
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions All extension port = Class 1
20-13-06 Class of Service Options (Supplementary Service) -
Automatic Off-Hook Signaling (Automatic Override)
COS 01~15 = 0
21-01-03 System Options for Outgoing Calls - Trunk Interdi-
git Time (External)
10 (seconds)
SL1000/SL1100 ISSUE 2.0
1-746
Voice Over (SL1100)
V
To Next Page
Loading...
