To program a key, press Speaker key, dial 851 (for 3-digit code) or 852 (for 2-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
For this
feature...
Use this key... When you ... Key Lamp Status Also See Srvc
Code
Note
Call Arrival
(CAR)
Keys
Code:
03 + ext. or dept
group
Operation: Press key
Place or answer a call
to your virtual (phan-
tom)extension.
Slow Flash red when
ringing, On red when
busy
-
Name Stor-
ing
Code: 55
Operation: Press key +
ext ## + name + Hold
Enter a name for the
extension to be dis-
played on telephones.
None 800
Night Serv-
ice
Code: 09 + mode (1~4 or
1~8)
Operation: Press key
Activate the Day/Night
Mode.
On red when activa-
ted
818
+ 0
Off-Hook
Signaling
Code: 33
Operation: Call ext. and
receive busy + Press key
Signal a busy exten-
sion.
None
Paging, Ex-
ternal
Code: 19 + zone (1~3)
Operation: Press Key
Make an external
zone page.
On red when activa-
ted
803
+ zone
Code: 20
Operation: Press key
Make an external All
Call page.
On red when activa-
ted
803
+ 0
Paging, In-
ternal
Code: 21 + zone(1~8, 1~9
or 01~32)
Operation: Press key
Broadcast to an Inter-
nal Paging Zone.
On red when activa-
ted
801
+ zone
Code: 22
Operation: Press key
Broadcast to all Inter-
nal Paging zones.
On red when activa-
ted
801
+ 0 or 00
Park Code:
04 + orbit (1~9 or
01~64)
Operation: Place or an-
swer call + Press key
Place a call into or re-
trieve a call from a
Park Orbit.
Fast flash when orbit
is busy (green at orig-
inator, red at others)
<Park>
#6
<Pickup>
6
Repeat Re-
dial
Code: 29
Operation: Place call and
press key
Activate Repeat Re-
dial while on a call.
Fast Flash while sys-
tem waits to redial
-
Reverse
Voice Over
Code: 47 + dest. ext.
Operation: Press and hold
key
Initiate Reverse Voice
Over.
Full BLF red - (SL1100)
Room Moni-
tor
Code: 39
Operation: Press key at
destination & source + ext
Activate Room Moni-
tor.
Dest. Fast Flash red,
Source Hold Flash
red
-
Save Num-
ber Dialed
Code: 30
Operation:
+ pswd
(0000) + place outside call
Save: Place call + Press
key
Redial: Line or Speaker
key + Press key
Save, redial or check
saved number.
None -
Secretary
Call (Buz-
zer)
Code: 41 + sec. ext
Operation: Press key
Call your secretary
(using the buzzer).
On red at source Fast
Flash red at destina-
tion
-
Secretary
Call Pickup
Code: 42 + boss ext
Operation: Press key
As a secretary pick up
a call ringing your
boss’s extension.
On red when activa-
ted
-
Selectable
Display
Messaging
Code: 18
Operation: Press key +
additional data if needed
Set up Call Forward-
ing Off-Premise, Se-
lectable Display Mes-
saging, VRS Park and
Page and VRS Per-
sonal Greeting.
Flashes red when ac-
tivated
-
Serial Call Code: 43
Operation: Trk call + Hold
+ Ext + Press key
Place a Serial Call to
a co-worker.
None -
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-17
To Next Page
Loading...
