To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 25
Operation:
Speaker key +
Press key
Group Call Pickup Answer a call ring-
ing a telephone in
another Pickup
Group - if you do
not know the group
number.
None 869
Code: 26 + Pickup
Group (1~32)
Operation:
Speaker key +
Press key + Pick-
up Group
Group Call Pickup Answer a call ring-
ing a telephone in a
specific Pickup
Group.
None 868
Code: 27
Operation: Press
key + bin + Line or
Speaker key
Speed Dialing Dial a stored Sys-
tem Speed Dialing
number.
None #2 + bin
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Dial a stored Group
Speed Dialing num-
ber.
None #4 + bin
Code: 29
Operation:Place
call + Press key
Repeat Redial Activate repeat re-
dial while on a call.
Fast Flash while sys-
tem waits to redial
-
Code: 30
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key +
Press key
Save Number Di-
aled
Save, redial or
check a saved num-
ber.
None 815
Code: 31
Operation:
Store: While on
call, Press key +
number to store
Use: Press key +
Speaker key or
line
Erase: Speaker
key + Press key
Memo Dial Store, use or check
a Memo Dial num-
ber.
None -
Code: 33
Operation: Call
ext. and receive
busy + Press key
Off-Hook Signaling Signal a busy ex-
tension.
None 809
Code: 34
Operation: Call
ext + Press key
Barge-In Barge-In on a co-
worker’s conversa-
tion.
None 810
Code: 35
Operation: Call
busy extension or
access busy trunk
+ Press key
Callback / Camp-
On / Trunk Queuing
Leave a Callback
request at a busy
extension, Camping
On to a busy exten-
sion, or Queue for a
busy trunk.
On red when activated 850
Code: 36
Operation: Dial
busy ext + Press
key
+ pswd
(0000) + place
outside call
Department Step
Calling
Step Call through a
Department Group
for an idle member.
None 808
SL1000/SL1100 ISSUE 2.0
2-20
Codes Tables
To Next Page
Loading...
