NEC SL1000 - Page 799

To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 37
Operation: Call
extension + Press
key
Call Forwarding / Do
Not Disturb Override
Override an exten-
sion Call Forward-
ing or Do Not Dis-
turb.
On red when activated 807
Code: 38
Operation: Leave
message: Call ext
+ Press key OR
Answer message:
Press key
Message Waiting Answer/Leave a
Message Waiting.
None
*
0
or
0
Code: 39
Operation: Press
key at destination
and source + ext
Room Monitor Activate Room
Monitor.
Fast Flash red at des-
tination, Hold Flash
red at source
-
Code: 41 + sec.
ext.
Operation: Press
key
Secretary Call Call your secretary
(using the buzzer).
On red at source Fast
Flash red at destina-
tion
-
Code: 42 + boss
ext.
Operation: Press
key
As a secretary pick
up a call ringing
your boss’s exten-
sion.
On red when activated -
Code: 43
Operation: TRK
call + Hold + ext +
Press key
Serial Call Place a Serial Call
to a co-worker.
None -
Code: 44
Operation: Place
or answer call +
Press key
Hold Put a call on Sys-
tem Hold (if Hold
key is reassigned).
None -
Code: 45
Operation: Place
or answer call +
Press key
Put a call on Exclu-
sive Hold.
None -
Code: 46
Operation: Press
key
Department Calling Log in or log out of
your Department
Calling Group.
On when removed, Off
when installed
750
Code: 47 + dest.
ext.
Operation: Press
and hold key
Reverse Voice Over Initiate Reverse
Voice Over.
Full BLF red - (SL1100)
Code: 48
Operation: Hear
Off-Hook Signal-
ing tones + Press
key
Voice Over Initiate or respond
to Voice Over.
On red when respond-
ing Hold Flash red
when listening
890 (SL1100)
Code: 49 + ext or
voice mail number
Operation: Press
key
Call Redirect Redirect an incom-
ing call to an exten-
sion or voice mail.
On red when activated
Flashes when in DND/
Call Forward
-
Code: 50
Operation: Press
key
Account Codes Enter Account Co-
des.
None
*
or ##
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-21