NEC SL1100 - Page 111

Program Num-
ber
Program Name Default
24-05-01 Department Group Transfer Target Setup 999
Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding Using DID Translation Table
Refer to Direct Inward Dialing (DID) on page 1-215 for additional DID programming.
Program Num-
ber
Program Name Default
22-11-05 DID Translation Table Number Conversion - Transfer Destination
Number 1
0
22-11-06 DID Translation Table Number Conversion - Transfer Destination
Number 2
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a Multiline Terminal only, press the Call Forwarding Programmable Function keys (PRG
15-07-01, PRG 15-07-10 ~ PRG 15-07-15 or SC 751 Key Code 10 ~ 15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9 + 2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1 ~ 9, 01 ~ 99 or 001 ~
100) or #9 + Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise non-split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
To activate Call Forwarding Off-Premise Split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forwarding Service Code.
3. Dial 1 (Set).
4. Dial 1 (Internal) or 0 (External).
ISSUE 2.0
SL1100
Features and Specifications Manual 1-99
C