• If a Central Office call is placed on HOLD and the Multiline Terminal does not have Direct Trunk
Appearance or an available Loop Key for this call, the call cannot be retrieved until the HOLD recall
timer expires. To prevent this, Direct Trunk Appearances or additional Loop Keys must be assigned
to the Multiline Terminal.
Default Settings
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
Any Trunk ETU (i.e., COIDB-B1, 2BRIDB-C1, 1PRIU-C1, etc.)
Related Features
Automatic Call Distribution (ACD) (V1.5 or higher)
Call Forwarding
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Directed Call Pickup
Do Not Disturb (DND)
Group Call Pickup
ISDN Compatibility
Line Preference
Long Conversation Cutoff
Night Service
Programmable Function Keys
Selectable Display Messaging
Warning Tone for Long Conversation
ISSUE 2.0
SL1100
Features and Specifications Manual 1-139
C
To Next Page
Loading...
