NEC SL1100 - Page 152

Guide to Feature Programming
Program
Number
Program Name Default Note
10-03-XX ETU Setup Refer to Programming Manual.
11-11-13 Service Code Setup (for Setup/Entry Operation)
- Display Language Selection for Multiline Ter-
minal
678
11-12-30 Service Code Setup (for Service Access) -
Specified Trunk Answer
672
11-12-43 Service Code Setup (for Service Access) - Uni-
versal Answer
#0
14-01-02 Basic Trunk Data Setup - Transmit Level 32 (0dB)
14-01-03 Basic Trunk Data Setup - Receive Level 32 (0dB)
14-02-02 Analog Trunk Data Setup - Ring Detect Type 1
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1~84 = Priority 1~84
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1
(Trunk Group 1)
Order Numbers 2, 3, 4 = 0 (Not
Specified)
All Other Routes (2~25) and Order
Numbers (1~4) = 0 (Not Specified).
14-07-01 Trunk Access Map Setup Access Map 1~84 = Trunk Ports
1~84 assigned with option 7 access
(incoming and outgoing access and
access when trunk is on Hold).
15-01-05 Basic Extension Data Setup - Restriction for
Outgoing Disable on Incoming Line
0
15-02-01 Multiline Telephone Basic Data Setup - Display
Language Selection (To select options 8~10,
press either 8 or Flash, then press line keys
1~3. Key 1 is option 8, Key 2 is option 9, and
Key 3 is option 10.)
1
15-02-02 Multiline Telephone Basic Data Setup - Trunk
Ring Tone
2
15-02-22 Multiline Telephone Basic Data Setup - Multiple
Incoming From Intercom and Trunk
1
15-03-03 Single Line Telephone Basic Data Setup - Ter-
minal Type
0
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
1
20-02-15 System Options for Multiline Telephones - Call-
er ID Display Mode
0
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and oth-
er Extension are Class 1
20-10-07 Class of Service Options (Answer Service) - Au-
tomatic Off-Hook Answer
COS 01~15 = 0
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
COS 01~15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
COS 01~15 = 0
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0
SL1100 ISSUE 2.0
1-140
Central Office Calls, Answering
C