NEC SL1100 - Page 260

Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Single Line Terminals
Guide to Feature Programming
Program
Number
Program Name Default Note
15-02-02 Multiline Telephone Basic Data Setup
- Trunk Ring Tone
2
15-02-03 Multiline Telephone Basic Data Setup
- Extension Ring Tone
5
15-02-35 Multiline Telephone Basic Data Setup
- Message Waiting Lamp Cycle for
Calling Extension
3
15-02-36 Multiline Telephone Basic Data Setup
- Message Waiting Lamp Cycle for
Called Extension
2
15-02-37 Multiline Telephone Basic Data Setup
- Voice Mail Message Wait Lamp Col-
or
1
15-02-38 Multiline Telephone Basic Data Setup
- Voice Mail Message Wait Lamp Cy-
cle
2
15-08-01 Incoming Virtual Extension Ring
Tone Setup
0 (Tone Pattern 1)
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
20-13-49 Class of Service Options (Supple-
mentary Service) - BLF Indication on
CO Incoming State
COS 01~15 = 0
20-15-01 Ring Cycle Setup - Normal Incoming
Call on Trunk
2
20-15-02 Ring Cycle Setup - PBX, CES Incom-
ing Call
8
SL1100 ISSUE 2.0
1-248
Distinctive Ringing, Tones and Flash Patterns
D