Program
Number
Program Name/Description Assigned Data
32-03-03 Door Box Basic Setup - Codec Receive Gain
This program controls the gain levels from the door box to the system.
1 ~ 63 = -15.5 dB ~ +15.5 dB
(default = 32, which is 0 dB)
11-12-36 Service Code Setup - Door Box Access
This program is used to assign an access code to call the door phone.
The access code must be within the valid numbering plan assigned in
PRG 11-01-01.
Maximum of 8 digits (0 ~ 9,
, #)
(default = 702)
Operation
To call a Door Box:
Multiline Terminal
1. Press Speaker key.
2. Dial 702.
3. Dial Door Box Number (1~8).
Single Line Terminal
1. Lift the handset.
2. Dial 702.
3. Dial Door Box Number (1~8).
To activate the Door Box strike:
Multiline Terminal
1. While talking to the Door Box, press Flash key.
Single Line Terminal
1. While talking to the Door Box, hookflash.
To answer a Door Box chime:
1. Lift the handset or press Speaker key.
To answer a Door Box call while busy on another call:
Multiline Terminal
If you are busy on a call, the display shows the incoming Door Box call and the large LED flashes.
SL1100
ISSUE 2.0
1-256
Door Box
D
To Next Page
Loading...
