NEC SL1100 - Page 271

Program Num-
ber
Program Name Default
15-03-04 Single Line Telephone Basic Data Setup - Flashing 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Ex-
tension are Class 1
81-10-07 COI Initial Data Setup - Hookflash Time Selection 1 9 (600ms)
81-10-08 COI Initial Data Setup - Hookflash Time Selection 2 14 (3.0 seconds)
Operation
To use the Drop key from a Multiline Terminal with a CO/PBX call in progress:
1. Press the Function key programmed as a Drop key.
2. Receive the new CO/PBX dial tone.
3. Dial the desired number.
To use the Drop key feature from a Single Line Terminal with a CO/PBX call in
progress:
1. Hookflash.
2. Receive internal dial tone.
3. Dial the Service Code (PRG 11-12-59, Default Not Assigned).
4. Receive the new CO/PBX dial tone.
5. Dial the desired number.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-259
D