NEC SL1100 - Page 320

System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Music on Hold
Programmable Function Keys
Single Line Terminals
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-30 Service Code Setup (for Service Access) - Specified Trunk
Answer
672
11-12-33 Service Code Setup (for Service Access) - Group Hold 732
11-12-34 Service Code Setup (for Service Access) - Answer for
Group Hold
762
14-01-16 Basic Trunk Data Setup - Forced Release of Held Call 0
14-07-01 Trunk Access Map Setup Access Map 1~84 = Trunk Ports 1~84
assigned with option 7 access (incoming
and outgoing access and access when
trunk is on Hold).
15-02-06 Multiline Telephone Basic Data Setup - Hold Key Operating
Mode
0
15-02-07 Multiline Telephone Basic Data Setup - Automatic Hold for
CO Lines
1
15-02-11 Multiline Telephone Basic Data Setup - Callback Automatic
Answer
1
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
16-02-01 Department Group Assignment for Extensions Department Groups 1 - 32
Priority 1 - 999
All extensions in Department Group 1
with priority in port order:
Port 1 priority = 1
Port 128 priority = 128
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Ex-
tension are Class 1
20-11-09 Class of Service Options (Hold/Transfer Service) - Group
Hold Initiate
COS 01~15 = 1
20-11-10 Class of Service Options (Hold/Transfer Service) - Group
Hold Answer
COS 01~15 = 1
SL1100 ISSUE 2.0
1-308
Hold
H