Figure 1-32 PCPro Connection Dialog
1. Select Connection Type.
You can connect by entering IP Address in IP or you can enter the NetBIOS Name which you set
at PRG 10-62-02 (Default is: SL1100)
2. To login, specify User Name and Password.
3. (Optional) Load a defined Connection Account (can skip steps 1~3 by using this option.)
4. To make the connection to the system, click Connect.
If using WebPro, a user can connect only via IP. To connect, launch a web browser (i.e., IE or
Mozilla®) and enter the IP address of the system (default 192.168.0.10).
SL1100 also supports a NetBIOS so that user can access by http://SL1100.
ISSUE 2.0
SL1100
Features and Specifications Manual 1-577
P
To Next Page
Loading...
