NEC SL1100 - Page 732

Program
Number
Program Name Default
20-13-21 Class of Service Options (Supplementary Service) -
Extension Name
COS 01~15 = 1
Operation
To program your extension name:
1. Press Speaker key.
2. Dial 700.
- OR -
Press the Extension Name Change key (PRG 15-07 or SC 751: 55).
3. Press Hold key.
4. Enter the name. (Refer to Table 1-63 Selectable Display Messaging Defaults on page 1-661.)
Your name can be up to 12 digits maximum.
5. Press Hold key.
6. Press Speaker key to hang up.
To program any extension name:
1. Press Speaker key.
2. Dial 700.
- OR -
Press the Extension Name Change key (PRG 15-07 or SC751: 55).
3. Enter the extension number to be named.
4. Enter a name. (Refer to Table 1-70 Keys for Entering Names on page 1-721.)
The name can have up to 12 digits maximum.
5. Press Hold key.
SL1100 ISSUE 2.0
1-720
Station Name Assignment - User Programmable
S