NEC SL1100 - Page 735

Guide to Feature Programming
Program Num-
ber
Program Name Default
11-15-12 Service Code Setup, Administrative (for Special Access -
Extension Data Swap
not assigned
20-13-42 Class of Service Options (Supplementary Service) - Exten-
sion Data Swap Enabling
COS 01~15 = 1
92-05-01 Extension Data Swap Password - Password not assigned
The following programs are swapped when Station Relocation is used:
• PRG 11-02 Extension Numbering
• PRG 12-05 Night Mode Group Assignment for Extensions
• PRG 13-03 Speed Dialing Group Assignment for Extensions
• PRG 15-01 Basic Extension Data Setup
• PRG 15-02 Multiline Terminal Basic Data Setup
• PRG 15-03 Single Line Terminal Basic Data Setup
• PRG 15-06 Trunk Access Map for Extensions
• PRG 15-07 Programmable Function Keys
• PRG 15-08 Incoming Virtual Extension Ring Tone Setup
• PRG 15-09 Virtual Extension Ring Assignment
• PRG 15-10 Incoming Virtual Extension Ring Tone Order Setup
• PRG 15-11 Virtual Extension Delayed Ring Assignment
• PRG 15-12 Conversation Recording Destination for Extensions
• PRG 15-14 Programmable One-Touch Keys
• PRG 16-02 Department Group Assignment for Extensions
• PRG 20-06 Class of Service for Extensions
• PRG 21-02 Trunk Group Routing for Extensions
• PRG 21-04 Toll Restriction Class for Extensions
• PRG 21-07 Toll Restriction Override Password Setup
• PRG 21-10 Dial Block Restriction Class Per Extension
• PRG 21-11 Extension Ringdown (Hotline) Assignment
• PRG 21-13 ISDN Calling Party Number Setup for Extensions
• PRG 21-15 Individual Trunk Group Routing for Extensions
• PRG 21-19 IP Trunk (SIP) Calling Party Number Setup for Extension
• PRG 23-02 Call Pickup Groups
• PRG 23-03 Universal Answer/Auto Answer
• PRG 23-04 Ringing Line Preference for Virtual Extensions
• PRG 24-03 Park Group
• PRG 26-04 ARS Class of Service
• PRG 30-02 DSS Console Extension Assignment
• PRG 31-02 Internal Paging Group Assignment
• PRG 41-02 ACD Group and Agent Assignments (V1.5 or higher)
• PRG 42-02 Hotel/Motel Telephone Setup
Operation
To exchange two terminals:
1. Pick up the handset or press Speaker key.
ISSUE 2.0
SL1100
Features and Specifications Manual 1-723
S