Program Num-
ber
Program Name Default
25-06-02 VRS/DISA One-Digit Code Attendant Setup - Destination
Number
not assigned)
31-05-01 Universal Night Answer/Ring Over Page 0
Operation
Transferring Trunk Calls
To Transfer a trunk calls to a co-worker's extention:
1. At the Multiline Terminal, press Transfer key.
- OR -
At a Single Line Terminal, hookflash.
You hear Transfer dial tone.
2. Dial the co-worker’s extension number.
If the extension is busy or does not answer, you can dial another extension number or press the line
key to return to the call. In addition, you may be able to hang up and have the call Camp-On.
SLT users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT user
has hung up the handset, the call can be retrieved by dialing
and the extension number to which it
had been transferred.
3. Announce the call and press the Transfer key (PRG 15-07 or SC 751: 06) or hang up.
If you do not have Automatic On-Hook Transfer, you must press your Transfer Programmable
Function Key to Transfer the call.
If your co-worker does not want the call, press the flashing line key to return to the call.
Single Line Terminal users can retrieve the call by pressing hookflash. If a call has been transferred
and the SLT user has hung up the handset, the call can be retrieved by dialing
and the extension
number to which it had been transferred.
If you do not want to screen the call, hang up without making an announcement.
To answer a call ttransferred to your extention:
1. Lift the handset or press Speaker key when a co-worker announces the call.
Transferring without Holding
To Transfer without holding (Multiline Terminal only):
1. Lift the handset.
2. Press busy line or press Speaker key.
3. When original caller hangs up, you are connected.
SL1100
ISSUE 2.0
1-750
Transfer
T
To Next Page
Loading...
