NEC SL1100 - Page 782

Program Num-
ber
Program Name Default
24-02-05 System Options for Transfer - Message Wait Ring Inter-
val Time
30 (seconds)
24-02-08 System Options for Transfer - Delayed Transfer Timer for
All Department Groups
10 (seconds)
24-05-01 Department Group Transfer Target Setup 999
Operation
To call a UCD Group:
1. At the Multiline Terminal, press Speaker key.
- OR -
At Single Line Terminal, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
The system routes the call to the first free telephone in the (UCD group) department.
To log out of your UCD (Depatment Calling) Group:
While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press Speaker key.
2. Dial 650 and 1.
- OR -
Press the Uniform Call Distribution Log In key (PRG 15-07 or SC 751: 46).
The key lights while you are logged out.
To log back in to your UCD (Department Calling) Group:
While you log back in, Uniform Call Distribution routes calls to your extension.
1. Press Speaker key.
2. Dial 650 and 0.
- OR -
Press the UCD (Department Calling) Log In key (PRG 15-07 or SC 751: 46).
The key goes out when you log back in.
SL1100 ISSUE 2.0
1-770
Uniform Call Distribution (UCD)
U