NEC SL1100 - Page 803

Program Num-
ber
Program Name Default Note
13-04-04 Destination Number
Internal Dial
Up to 36 digits
Incoming ring Group
0-25
Remote Monitor
Dial Up to 8 digits
No Setting
13-04-05 Incoming ring pattern
0 = Normal pattern
1-4 = Tone pattern (1-4)
5-9 = Scale pattern (1-5 )
0
13-04-07 VRS Incoming Message Number
(0 ~ 100)
0
15-02-55 VRS Incoming Message Number
(0 ~ 100)
0
11-10-43 VRS Incoming Message Setting 778
Operation
To Set the Incoming Voice/Melody ringing from Service Code
1. Press Service Code 778.
VRS INCOM
RI:1 STA:2
(This display indication is for IP and Multiline Terminals.)
2. Press Enter 1 (RI).
VRS INCOM CID
(This display indication is for IP and Multiline Terminals.)
3. Enter the Caller ID Number.
You can clear the digits entered by pressing Exit key.
VRS INCOM CID
123
(This display indication is for IP and Multiline Terminals.)
4. Press Hold.
ABB 0005
123
(This display indication is for IP and Multiline Terminals.)
ISSUE 2.0
SL1100
Features and Specifications Manual 1-791
V