NEC SL1100 - Page 805

10. If you set correctly you will hear the Confirmation Beep and see the following Screen.
Set ABB
(This display indication is for IP and Multiline Terminals.)
11. Press Speaker and end the Setting.
To Cancel the Incoming Voice Melody ringing from Service Code
1. Press Service Code 778.
VRS INCOM
RI:1 STA:2
(This display indication is for IP and Multiline Terminals.)
2. Press Enter 1 (RI).
VRS INCOM CID
(This display indication is for IP and Multiline Terminals.)
3. Enter the Caller ID Number.
You can clear the digits entered by pressing Exit key.
VRS INCOM CID
123
(This display indication is for IP and Multiline Terminals.)
4. Press Hold.
ABB 0005
123
(This display indication is for IP and Multiline Terminals.)
5. Press Hold. You can set Name (PRG 13-04-02).
ABB 0005
-
(This display indication is for IP and Multiline Terminals.)
ISSUE 2.0
SL1100
Features and Specifications Manual 1-793
V