NEC SL1100 - Page 848

To program a key, press Speaker key, dial 751 (for 3-digit code) or 752 (for 2-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
For this
feature...
Use this key... When you ... Key Lamp Status Also See Srvc
Code
Note
Hold Code: 44
Operation: Place or an-
swer call + Press key
Put a call on System
Hold (if your tele-
phone Hold key is re-
assigned).
None -
Code: 45
Operation: Place or an-
swer call + Press key
Put a call on Exclu-
sive Hold.
None -
Meet Me
Conference
(Also see
Confer-
ence)
Code: 32
Operation: Press key
Join a Meet Me Con-
ference.
None 763
or
764
Memo Dial Code: 31
Operation:
Store: While on call, press
key + number to store
Use: Press Key + Call or
line
Erase: Speaker key +
Press key
Store, use or check a
Memo dial number.
None -
Message
Waiting
Code: 38
Operation: Leave
message: Call ext + Press
key OR Answer
message: Press key
Answer/Leave a Mes-
sage Waiting.
None
*
0
Microphone
Cutoff
Code: 02
Operation: Set up call +
Press key
Use Microphone Cut-
off.
On red when activa-
ted
-
Call Arrival
(CAR)
Keys
Code:
*
03 + ext. or dept
group
Operation: Press key
Place or answer a call
to your virtual (phan-
tom)extension.
Slow Flash red when
ringing, On red when
busy
-
Name Stor-
ing
Code: 55
Operation: Press key +
ext ## + name + Hold
Enter a name for the
extension to be dis-
played on telephones.
None 700
Night Serv-
ice
Code: 09 + mode (1~4 or
1~8)
Operation: Press key
Activate the Day/Night
Mode.
On red when activa-
ted
718 + 0
Off-Hook
Signaling
Code: 33
Operation: Call ext. and
receive busy + Press key
Signal a busy exten-
sion.
None
*
Paging, Ex-
ternal
Code: 19 + zone (1~3)
Operation: Press Key
Make an external
zone page.
On red when activa-
ted
703 + zone
Code: 20
Operation: Press key
Make an external All
Call page.
On red when activa-
ted
703 + 0
Paging, In-
ternal
Code: 21 + zone(1~8, 1~9
or 01~32)
Operation: Press key
Broadcast to an Inter-
nal Paging Zone.
On red when activa-
ted
701 + zone
Code: 22
Operation: Press key
Broadcast to all Inter-
nal Paging zones.
On red when activa-
ted
701 + 0 or 00
Park Code:
*
04 + orbit (1~9 or
01~64)
Operation: Place or an-
swer call + Press key
Place a call into or re-
trieve a call from a
Park Orbit.
Fast flash when orbit
is busy (green at orig-
inator, red at others)
<Park>
#6
<Pickup>
*
6
Repeat Re-
dial
Code: 29
Operation: Place call and
press key
Activate Repeat Re-
dial while on a call.
Fast Flash while sys-
tem waits to redial
-
SL1100 ISSUE 2.0
2-18
Codes Tables