To program a key, press Speaker key, dial 751 (for 3-digit code) or 752 (for 2-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
For this
feature...
Use this key... When you ... Key Lamp Status Also See Srvc
Code
Note
Reverse
Voice Over
Code: 47 + dest. ext.
Operation: Press and hold
key
Initiate Reverse Voice
Over.
Full BLF red -
Room Moni-
tor
Code: 39
Operation: Press key at
destination & source + ext
Activate Room Moni-
tor.
Dest. Fast Flash red,
Source Hold Flash
red
-
Save Num-
ber Dialed
Code: 30
Operation:
+ pswd
(0000) + place outside call
Save: Place call + Press
key
Redial: Line or Speaker
key + Press key
Save, redial or check
saved number.
None -
Secretary
Call (Buz-
zer)
Code: 41 + sec. ext
Operation: Press key
Call your secretary
(using the buzzer).
On red at source Fast
Flash red at destina-
tion
-
Secretary
Call Pickup
Code: 42 + boss ext
Operation: Press key
As a secretary pick up
a call ringing your
boss’s extension.
On red when activa-
ted
-
Selectable
Display
Messaging
Code: 18
Operation: Press key +
additional data if needed
Set up Call Forward-
ing Off-Premise, Se-
lectable Display Mes-
saging, VRS Park and
Page and VRS Per-
sonal Greeting.
Flashes red when ac-
tivated
-
Serial Call Code: 43
Operation: Trk call + Hold
+ Ext + Press key
Place a Serial Call to
a co-worker.
None -
Step Call Code: 36
Operation: Press key
Step through a de-
partment group.
None 2
Transfer Code: 06
Operation: Establish call
+ Hold + Ext + Press key
Transfer a call. None -
Trunk
Group
Routing
Code: